Surface Marker Tek Buoy [Self Sealing]

RM340.00

The Surface Marker Pro Buoy is a Delayed Surface Marker Buoy (DSMB) that should be inflated at depth prior to ascent via the opening at the bottom of the unit. The self sealing internal baffle will ensure that the unit stays fully inflated during its ascent and on the surface.The expanding air is vented via the Over Pressure Release Valve.

Surface Marker Pro is available in three colour combination:

Safety Orange - Both sides of the buoy are orange. This is normally used by tech divers in most parts of the world during their ascent and decompression stop to signal the All OK.

Neon Yellow - Both sides of the buoy are yellow. This is normally used by tech divers in most parts of the world during ascent to signal that the diver or a member of the team has encountered a problem and may require immediate assistance by the support team. A dive slate can be attached to the top handle communicating the nature of the problem.

Orange / Yellow Combo - With both an orange and a yellow panel this is by far the most visible combo for the recreational diver. The orange panel is more visible in bright sunlight and significant glare. While the yellow panel will prove its worth as light deteriorates and the rain clouds move in. The contrast provided by the two alternating panels with the added effect of the Solas tape will ensure that you stand out.

Important Note: The colour signal codes are not standard and may vary regionally and by vessel. The Orange / Yellow Combo is the best choice for recreational divers. It is highly unlikely that recreational and tech divers will be diving the same sight and that a Orange / Yellow Combo buoy be confused for a distress signal as buoys do not remain static while attached to a line and both sides will be visible in a very short period of time.

Features

tek-solastape